Skip to content
English
Submit a Support Ticket
  • There are no suggestions because the search field is empty.

CI-110p - resetting the display board for blinking lights

If CI-110p lights blink red/blue and the instrument's performance is sporadic, then the display board can be "reset" to potentially resolve the issue.

If CI-110p lights blink red and blue lights To reset CI-110p display-board: -First remove the 3 Li-ion batteries from the instrument. -Then remove the upper cover and briefly remove and then re-seat it to reset the display-board > (You will need to remove 4 screws as shown on below photo and then lift the upper display assembly to remove it. Then carefully replace or re-seat the assembly, being careful not to bend the 20-connector pins and then replace the screws) - Then reinsert Li-ion batteries and power on unit to test.